BCd61防爆灯 可配装高压钠灯金卤灯高压汞灯防爆防腐上海飞策*耐用

BCD61防爆灯
使用范围
1区、２区危险场所。
II A、II B、IIC类爆炸性气体环境。
适用于可燃性粉尘场所
户内、户外（IP65）
产品特点
1、外壳采用铸铝合金(含铜量少于0.4%）压铺成型。经高速抛丸清理后表面高压静电喷塑，具有良好的防腐性能。不锈钢外露紧固件
2、透明件采用抗高能军冲击的钢化玻璃，且为防眩光设计;
3、灯具为一体式结构。但光源腔、电器箱和接线腔分别独立。安装维护方便。电气性能可靠;
4、灯具内置电子镇流器或电感镇流器，电子镇流器具有高效节能和高功率因数cosΦ〉0.99，与电感镇流器相比，节约无功功
  率达70%一90%；对电网系统自身输电损耗减少80% ;综合节电率在30%以上。光通量增加12%
5、电子镇流器具有宽电压150~260V输入和中频率的光输出，*50Hz交流电的频闪，保证了照明质量，且启动电流小，对电
  网和光源无冲击。延长光源寿命30% ;
6、电子镇流器具有自动保护功能，对于灯具在运行过程中出现的意外，如灯具的开路短路、内部破裂或漏气以及线路的瞬间
  停电等意外事故对电子镇流器或光源的损坏。均设有自动保护功能，能有效提高灯具及操作人员的*性;
7、当使用电感镇流器时，可带补偿电容;
8、采用优质铝板反光罩，提高灯具的使用效率;
9、接线端子采用压线式，使用户不需要加任何附件，方便将导线与端子有效可靠连接;
10、设置了方便开启的孔和挂钩;
11、金卤灯70W可加应急装置，应急和照明光源同为L7ow光源，适用于要求高的场所
BCD61 explosion-proof lamp
Range of use
1 District, 2 District dangerous places.
A II, B II, IIC explosive gas environment.
Suitable for combustible dust
Indoor and outdoor (IP65)
Product features
1, the shell is made of aluminum alloy (copper is less than 0.4%) pressure molding shop. After blast cleaning by high pressure electrostatic plastic sprayed surface, has good anticorrosion performance. Stainless steel exposed fasteners
2, transparent parts using anti high energy force of the impact of tempered glass, and for the design of anti glare;
3, lamps and lanterns as an integral structure. But the light source cavity, the electrical box and the wiring chamber are independent. Convenient installation and maintenance. Reliable electrical performance;
4, built-in electronic ballast lamps or inductive ballast, electronic ballast with high efficiency and high power factor cos phi = 0.99, compared with the inductance ballast, reactive power saving
The rate of 90% is 70%; the transmission loss of the power network system is reduced by 80%, and the comprehensive power saving rate is above 30%. The flux increased by 12%
5, the electronic ballast has 150~260V wide voltage input and light output frequency, eliminate 50Hz frequency flash, to ensure the quality of lighting, and small starting current, electric
Net and light source no impact. Extend the light source life 30%;
6, electronic ballast with automatic protection function, for the lamp in the operation process of the accident, such as the open circuit short circuit, internal rupture or leakage and the line of the moment
The damage to electronic ballast or light source, such as power failure, etc.. Are equipped with automatic protection function, can effectively improve the safety of lamps and operators;
7, when the use of inductive ballast, with a compensation capacitor;
8, the use of high quality aluminum reflector, improve the efficiency of the use of lamps;
9, using line type terminals, users do not need to add any accessories, convenient wire and terminal connection will be effective and reliable;
10, set the convenient opening and hook;
11, metal halide lamp 70W can add emergency device, emergency and lighting source with L7ow light source, suitable for high demand place